Lift-out Bridge Repairs part 5

 Today I got a bit further with the repairs to my large lift-out bridge.

With both ends at the fiddleyard and layout completed, it was time to work on refitting the track.

Where I got to before today, one end of the bridge cut off and fixed to the layout baseboard

The other end of the bridge cut off and fixed to the fiddleyard baseboard

Adding 2 of the additional brass screws to which the rails will be soldered to keep them in place

The 2 sections of rail have been cut to length and fitted to the sleepers to ensure the screws are at the correct height to line up with the rails on the bridge

The other end of the bridge gets the same treatment

Gluing the 1st section of track in place using Evostik.

Gluing the 2nd section of track in place at the other end using Evostik.

Keith