From when my Parents gave me my first train set for a Christmas present as a child, I have had an interest in model railways. I originally started in "OO" gauge, but have also built in "N" and "O" gauge. One layout I built was my exhibition layout "Holmehurst" which was in "O" gauge, and I exhibited it around the country. Photos of it can be seen by following this link.

I inherited some "OO9" rolling stock from my late father, including a loco I built from a white metal kit for him, and ever since living on our working narrowboat Hadar I have been thinking about building a "OO9" layout.

For those who do not know, "OO9" is "OO" scale, which is 4mm to 1ft, but the track and rolling stock are narrow gauge, equivalent to 2ft gauge in real life. Modelling-wise this means that I can used standard "OO" scale buildings, people, scenery etc. of which there is a far greater range of ready built items and kits to choose from, but it has the advantage that the reduced size of the track and rolling stock means that curves can be tighter than for standard gauge, without losing a realistic look within a restricted layout size.

I had thought about building a layout in our garden alongside our mooring at the Saltisford Canal Centre, but after much thought decided that this would not be practical. However I built a small layout (now dismantled) which sat on the shelf above the display cabinet, in our saloon, which houses my "O" gauge rolling stock. Having finished it, my wife Jo suggested that when we stop selling coal I could build a layout in the hold. As we stopped selling coal at the end of 2016.

This is a full record of the building of the original layout, and having moved into a flat in Warwick and sold our narrowboat, this will now cover the building of the New Hadarford in our flat.

Please feel free to leave comments, I am always interested in suggestions or questions.

Tuesday, 20 October 2026

Baseboard Repairs

 Accidents do happen, so some repair work this afternoon. At the weekend I was doing some work underneath the layout and I leant against the corner leg and due to the lever action I split apart the corner 🤬. I have added 2 long bolts at the front, squeezed some glue in the gap, replaced the single short countersunk screw with a longer one, added 3 longer countersunk screws then revarnished with stained varnish over the joint. It should be a lot stronger now  Then once the stained varnish had dried I gave the whole frontage a coat of gloss varnish 😊

Repaired joint before coating with stained varnish

After a coat of stained varnish

The complete frontage painted with gloss varnish

Keith

Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)